LinkedIn Link Preview Not Showing? 7 Causes and Fixes

Why LinkedIn shows a bare link or an old image instead of a preview card, how to fix each cause, and why scheduled posts follow different rules.

A LinkedIn post with a bare link next to the same post with a full preview card, image, title and domain

Guide · By PostBoost team · · Markdown

Short answer: LinkedIn builds a link card from four tags in the page's <head>: og:title, og:image, og:description and og:url. When the card is missing, the cause is almost always one of seven things: no og:image, a relative image URL, an image LinkedIn can't fetch, an image that is too small, a redirect, tags added by JavaScript, or an old copy LinkedIn still holds. Paste the link into the free link preview checker to see which one, fix it, then ask LinkedIn to read the page again with Post Inspector.

One case works differently, and most guides skip it: posts published by a scheduler or the API. LinkedIn does not read the page for those at all. The app sends the card, so Post Inspector changes nothing. More on that below.

What LinkedIn needs to build the card

LinkedIn's help page lists the tags and the image rules (LinkedIn Help):

<meta property="og:title" content="LinkedIn link preview not showing? 7 fixes" />
<meta property="og:description" content="Why the card is missing and how to fix it." />
<meta property="og:image" content="https://example.com/og/link-preview.jpg" />
<meta property="og:url" content="https://example.com/blog/link-preview" />
rule value source
image size at least 1200 × 627 px LinkedIn Help
image ratio 1.91:1 LinkedIn Help
image file size 5 MB at most LinkedIn Help
narrow image under 401 px wide shows as a small thumbnail LinkedIn Help
image format for app-created posts JPG, GIF or PNG LinkedIn Images API

LinkedIn documents no character limit for the card title or description. Keep the title around 60 characters and the description under about 160 so neither gets cut on a phone.

The 7 causes, in the order to check them

Run the link through the link preview checker first. It loads the page once, like a preview crawler, lists the tags it found, draws the LinkedIn card and writes a warning for most of the problems below. The LinkedIn link preview checker shows only the LinkedIn card, with LinkedIn's tag and image size checks.

  1. No og:image. Without it LinkedIn has nothing to put in the card, and the post shows a bare link or a text-only card. The checker says "No og:image: most networks show a small or text-only card." Add the tag to the page template, not by hand to each post.
  2. A relative image URL. og:image="/og/post.jpg" or //cdn.example.com/post.jpg looks fine in the browser, but crawlers need the full address. Write https://example.com/og/post.jpg. The checker flags this as "og:image is a relative URL".
  3. An image LinkedIn can't fetch. LinkedIn's own help page says that when the image meets the rules but still doesn't show, "your website may be blocking us from pulling the image", for example from a protected folder. Check that the image URL opens in a private window, and that your firewall, bot protection or robots.txt doesn't block crawlers from the image path.
  4. An image that is too small or the wrong shape. Under 401 px wide, LinkedIn shows a small thumbnail beside the title instead of a full-width image. The checker reads the image size (from og:image:width/og:image:height, or from the file) and warns below 1200 × 630. Use 1200 × 627 or larger at 1.91:1; the image size guide has the exact sizes for every network.
  5. A redirect or a different canonical URL. Shortened links, http:// to https:// hops and tracking redirects can land the crawler on a page with different tags. The checker lists every redirect and warns when the canonical URL points elsewhere. Share the final URL. If you add UTM parameters, build them with the UTM builder and make sure the tagged URL still returns the same page.
  6. Tags added by JavaScript. Preview crawlers read the HTML your server sends and don't run scripts. If a single-page app writes its meta tags in the browser, LinkedIn never sees them. The checker reads raw HTML the same way, so if it finds no tags but your browser's inspector does, this is the cause. Render the tags on the server.
  7. An old copy. LinkedIn keeps the preview it read the first time. After you fix the page, open Post Inspector, paste the URL and inspect it: it reads the page again and shows what it found (Kinsta). New posts then get the new card. A post that is already live usually keeps its old one, so delete and reshare it if the card matters.

Scheduled and API posts follow different rules

When you paste a link into LinkedIn yourself, LinkedIn's crawler reads the page. When an app publishes the post through LinkedIn's API, that never happens. LinkedIn's Posts API documentation says it "does not support URL scraping for article post creation"; the app must set the thumbnail, title and description itself (Posts API). Three things follow from that:

  • Post Inspector doesn't help. LinkedIn's cache plays no part in a post an app created. The card shows whatever the app read from your page and sent.
  • The card is fixed once the post is live. The Posts API lets an app update a live post's text, call to action and a few other fields, but not its article card. To change it, publish a new post.
  • The page has to be readable when the post goes out, not only when you wrote it. A page that is down, password-protected or blocks bots at publish time gets no card.

How PostBoost builds the LinkedIn card

In the PostBoost editor, the card comes from the first link in the post's text:

  1. Write the post and paste the full link, starting with https://. A bare example.com without https:// gets no card.
  2. Leave the post without images or video. With media attached, LinkedIn shows the media and PostBoost sends no link card.
  3. Check the LinkedIn preview in the editor. PostBoost reads the page and draws the card with its image, title and domain. If no card appears there, PostBoost found no image on the page: run the link through the link preview checker and fix the tags first.
  4. Schedule the post. At publish time PostBoost reads the page again, takes og:title (or the page <title>), og:description and og:image, uploads the image to LinkedIn as the card's thumbnail and publishes the post with the card. A page that loads with no title at all goes out as a plain text post with the link.

Because PostBoost reads the page again at publish time, a fix you make to the tags before the scheduled time is picked up without editing the post.

Sending the card through the API

Through the REST API, a content item's url field is the link the card is built from. If you leave it out and attach no media, PostBoost uses the first http(s) link in body, the same as the editor. Sending it yourself makes the choice explicit when the text holds more than one link:

curl -s -X POST "https://postboost.co/app/api/$WORKSPACE_UUID/posts" \
  -H "Authorization: Bearer $POSTBOOST_API_TOKEN" \
  -H "Content-Type: application/json" \
  -H "Idempotency-Key: $(uuidgen)" \
  -d '{
    "accounts": [14],
    "schedule": true,
    "date": "2026-10-29",
    "time": "09:30",
    "timezone": "Europe/London",
    "versions": [{
      "account_id": 0,
      "is_original": true,
      "content": [{
        "body": "Our link previews kept breaking on LinkedIn. Here is the checklist we use now: https://example.com/blog/link-preview",
        "url": "https://example.com/blog/link-preview",
        "media": []
      }]
    }]
  }'

Find the LinkedIn account's id with GET /{workspaceUuid}/accounts. Leave media empty: with media IDs in the item, LinkedIn gets the media instead of the card.

  • og:title, og:description, og:image and og:url are in the HTML the server sends.
  • og:image is an absolute https:// URL to a JPEG or PNG, 1200 × 627 or larger, under 5 MB, that opens in a private window.
  • The link you share is the final URL: no redirect chain, canonical pointing to itself.
  • The link preview checker shows the LinkedIn card with your image and no warnings.
  • For a page you changed after sharing it before: inspect it once in Post Inspector, then share it in a new post.
  • For scheduled posts: the post has no media attached, the link starts with https://, and the page will be online at the scheduled time.

The post text matters as much as the card. LinkedIn shows only the first lines before "see more", so lead with the reason to click (see the LinkedIn character limit guide), and pick the hour with the best time to post on LinkedIn.

Do this in PostBoost

Free tools for this guide

FAQ

Why is my LinkedIn link preview not showing?

Usually the page has no og:image (or a relative one), the image is blocked or too small, the link redirects somewhere without tags, or LinkedIn still holds an older copy of the page. Run the URL through a link preview checker to see which one, fix the tags, then refresh LinkedIn's copy with Post Inspector.

How do I refresh a LinkedIn link preview?

Paste the URL into LinkedIn's Post Inspector at linkedin.com/post-inspector. It reads the page again and shows the title, image and description it found. Then share the link in a new post; a post that is already published usually keeps the card it was created with.

What size should the image be for a LinkedIn link preview?

LinkedIn asks for at least 1200 x 627 pixels at a 1.91:1 ratio and at most 5 MB. Images under 401 pixels wide show as a small thumbnail instead of a large card. Use a JPEG or PNG at an absolute https:// URL.

Why does my scheduled LinkedIn post have no link preview?

LinkedIn's API does not read the page for posts created by apps; the app must send the title, description and thumbnail itself. In PostBoost the editor builds the card from the first link in the post when the post has no image or video attached. If you attach media, LinkedIn shows the media instead of a card.

Does LinkedIn Post Inspector fix posts published by a scheduler?

No. For a post created through LinkedIn's API, the card is saved with the post when it is published, and LinkedIn's API cannot change it afterwards. Fix the page's tags, then publish a new post.

Can I edit the preview of a LinkedIn post that is already live?

Not the card of a post an app published: LinkedIn's Posts API lets an app update a live post's text, not its article card. Delete the post and publish it again once the tags are right.

Sources

Related guides

Try PostBoost free

API, webhooks and MCP on every plan, including Free. No credit card required.