# Instagram QR Code: Built-In Profile Code or a Trackable One

Published: 2026-11-11

**Key takeaways:** Instagram has a free QR code for your profile: Profile, then Share profile, in the iPhone or Android app. It opens your profile only and you cannot count its scans. For a post, a website or scan counts, make a code with UTM tags and send it to a page you own.

**Short answer:** Instagram already gives you a free QR code for your profile. In the app, tap **Profile**, then **Share profile** below your bio, and your profile card with its code appears. It is the right choice when all you want is followers. It is the wrong choice when the code should open a specific post, your website or a menu, or when you need to know how many people scanned it: the built-in code only opens your profile, and the scan happens inside Instagram where your analytics cannot see it. For those cases, make a code with the free [QR code generator](/tools/qr-code-generator), add UTM tags, and point it at a page you own.

## Built-in code or a generator?

| You want | Built-in Instagram code | QR code generator |
|---|---|---|
| More followers from a table card, badge or slide | Yes | Works too |
| To open one post or reel | No, profile only | Yes, use the post's link |
| To open your website, shop or menu | No | Yes |
| To count scans per poster or flyer | No | Yes, with UTM tags on a link to your site |
| Your colours | Instagram's own Color, Emoji and Selfie styles | Any colours with enough contrast |
| A print file | A saved image from the app | SVG (sharp at any size) or PNG |
| Make it on a computer | No, iPhone and Android app only | Yes |

## Find your Instagram QR code

Instagram's Help Center gives the same steps for the iPhone and Android apps:

1. Tap **Profile** or your profile picture in the bottom right.
2. Tap **Share profile** below your bio. Your profile card opens, with the QR code on one side; swipe the card to see the other side.
3. To change the style, tap anywhere on the screen or the button at the top, and pick **Color**, **Emoji** or **Selfie**.
4. Use the options below the card: **Share to...**, **Copy link**, **Download** (saves the card as a profile card video or as the QR code) or **Add to story**.

The card takes your picture, bio and links from your profile, so update the profile and the card follows. The Help Center notes the feature is not available on computers and may not be available to everyone yet.

To scan someone else's code, the same **Share profile** screen has a QR code icon in the top right that opens a scanner. Most phone cameras also read QR codes without opening Instagram. Instagram's Help Center also notes that you cannot log in to Instagram with a QR code: the code finds a profile, nothing more.

## When the built-in code is not enough

**You want a post, not the profile.** Open the post, tap **Options** (the three dots) and **Copy link**, then paste that link into a generator. If the account is private, only its approved followers can open the post, so a code on a public poster should point at a public account.

**You want to count scans.** This is where most guides go wrong. Adding UTM tags to `instagram.com/yourbrand` does nothing for you: UTM tags are read by the analytics on the site that receives the visit, and a scan of that code lands on Instagram's site, not yours. To count scans, the code has to open a page you own:

1. Make a short landing page on your site, for example `/hello`, with a clear **Follow us on Instagram** button and whatever else the scan is for (the menu, the offer, the signup).
2. Tag the link to that page, one set of tags per placement: `utm_source=poster`, `utm_medium=print`, `utm_campaign=spring-menu`.
3. Make the code from the tagged link.

Every scan now shows up in Google Analytics as a session from `poster / print`, and the button still sends people to your profile.

**You cannot change it later.** A plain QR code stores the link itself, with no redirect service in between. That is why our codes never expire, and also why you cannot change the target after printing. Pointing the code at your own page is the fix: you can change the page whenever you like without reprinting.

## Make a trackable QR code step by step

In the free [QR code generator](/tools/qr-code-generator):

1. Paste the link to your page into **Link or text**.
2. Open **Add UTM tags (links only)** and fill **Source**, **Medium** and **Campaign** in lower case, for example `poster`, `print` and `spring-menu`. Leave **Term** and **Content** empty unless you need them. The tags are added exactly as the [UTM builder](/tools/utm-builder) adds them, and the tool warns when a value has capital letters or spaces, because GA4 reports `Poster` and `poster` as two different sources.
3. Pick an **Error correction** level. M is the default; choose Q or H for a code that may get scratched or folded.
4. Set **Code colour** and **Background**. Keep the code dark on a light background: the tool warns when the contrast drops below 4.5:1, or when the code is light on dark, which some scanner apps cannot read.
5. Scan the preview with your phone, then **Download SVG** for print or **Download PNG** (128 to 2,048 px) for screens and slides.

Make one code per placement (the poster at the till, the flyer in the bag, the slide at the talk) with a different `utm_source`, and you can see which one earned its place. Our [UTM naming guide](/learn/utm-parameters-for-social-media) has a convention that keeps those values tidy over time.

## Read the scans in Google Analytics

In GA4, open **Reports → Acquisition → Traffic acquisition** and change the primary dimension to **Session source / medium** or **Session campaign**. Your scans appear as `poster / print`.

One surprise: the default channel view will put them under **Unassigned**. GA4's default channel group has no rule for print or QR mediums, and Unassigned is the value Analytics uses when no channel rule matches. That is expected, not a broken tag. Read your print traffic by source and medium, or add a custom channel group for `medium = print` if you want it as its own row.

## Print it so it scans

A longer link makes a denser code, and a denser code needs more room. We ran the same link through our generator's API with and without tags (the module count is the width of the code in squares):

| Encoded text | Error correction | Modules per side | With the 4-module margin |
|---|---|---|---|
| `https://example.com/spring-menu` (31 characters) | M or Q | 29 | 37 |
| Same link with `utm_source=poster&utm_medium=print&utm_campaign=spring-menu` (91 characters) | M | 41 | 49 |
| Same tagged link | Q | 49 | 57 |
| Same tagged link | H | 53 | 61 |

Printed 25 mm wide, the 37-module code has modules of about 0.68 mm; the 57-module one, about 0.44 mm. Same space, smaller squares, harder scan. What to do with that:

- **Keep the margin.** DENSO WAVE, which invented the QR code, requires a clear margin four modules wide on every side. Our downloads include it; do not crop it off in the layout.
- **Print as large as the space allows.** That is DENSO WAVE's own advice, and it matters more than any minimum size quoted online. On a printer, it also recommends at least 4 dots per module: at 600 dpi that is a module of about 0.17 mm.
- **Keep tags short.** `spring-menu` beats `spring-menu-2026-ground-floor-poster-a`. Short values mean fewer modules.
- **Match the level to the place.** DENSO WAVE describes the levels as restoring about 7% (L), 15% (M), 25% (Q) and 30% (H) of the code. Higher levels can add modules (41 to 53 in the table), so use Q or H where the code will get damaged, not by default.
- **Test the proof.** Print one copy at the real size and scan it with two different phones from where people will stand.

## Do it from the API or an AI agent

The generator is also a free endpoint, with no account needed:

```bash
curl -X POST "https://postboost.co/app/api/tools/qr-code-generator" \
  -H "Content-Type: application/json" \
  -d '{"data":"https://example.com/spring-menu","utm":{"source":"poster","medium":"print","campaign":"spring-menu"},"error_correction":"Q","size":1024}'
```

It returns the exact text it encoded, the code as an SVG and any warnings. For the call above:

```json
{
  "data": "https://example.com/spring-menu?utm_source=poster&utm_medium=print&utm_campaign=spring-menu",
  "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" width=\"1024\" height=\"1024\" viewBox=\"0 0 57 57\" ...",
  "warnings": []
}
```

Leave out `medium` and `campaign` and `warnings` says so: `Add medium, campaign: GA4 expects source, medium and campaign.` The same tool is `generate-qr-code` on the free MCP server at `https://postboost.co/mcp/tools`, so you can ask an assistant for "a QR code for our spring menu page, one per placement: poster, flyer and table card, tagged for print" and get three SVGs with matching tags. The [API docs](/docs/free-tools/qr-code-generator) list every field.

## Use the same link in your posts

The tagged landing page works online too. Instagram does not turn a link in a caption into something people can tap (see [why Instagram caption links aren't clickable](/learn/instagram-caption-links-not-clickable)), so put the page in your profile's Links field and say "link in bio". On LinkedIn and Facebook, paste the link with `utm_medium=social` and that network as the source. In PostBoost you can give each network its own version of a post, so each one carries its own tagged link, and your print and social traffic sit side by side in GA4. For what PostBoost itself reports per account and per post, see [analytics and reports](/features/analytics), and for the monthly write-up, our [social media report template](/learn/social-media-report-template).

## Do this in PostBoost

- [Analytics](https://postboost.co/features/analytics): Account and post analytics for your social accounts in one place, and reports you can download as CSV or a branded PDF.

## Free tools for this guide

- [QR code generator with UTM tags](https://postboost.co/tools/qr-code-generator): Make a QR code for any link or text, add UTM tags so scans show up in analytics, and download it as SVG or PNG. Free, no signup, no expiry.
- [UTM builder for social media links](https://postboost.co/tools/utm-builder): Build UTM-tagged links for social posts in your browser: network presets, live preview, naming warnings and saved presets. Free, no signup.

## FAQ

### Where is my Instagram QR code?

In the Instagram app, tap Profile or your profile picture in the bottom right, then tap Share profile below your bio. Your profile card with its QR code opens. Instagram's Help Center lists this for the iPhone and Android apps; it is not available on a computer.

### Can I customise my Instagram QR code?

A little. On the Share profile screen, tap the screen or the button at the top to switch between Color, Emoji and Selfie styles. You cannot add your logo, change the target or add tracking. For any of that, use a QR code generator.

### Can I make a QR code for a specific Instagram post or reel?

Yes. Copy the post's link (Options, then Copy link) and paste it into a QR code generator. If the account is private, only its followers can open the post, so check the account is public before you print.

### Can I track how many people scan my Instagram QR code?

Not with the built-in code: a scan opens Instagram, and your analytics never see it. To count scans, point the code at a page on your own site with UTM tags, for example utm_source=poster, utm_medium=print and a campaign name, and put a button to your Instagram profile on that page.

### Should I add UTM tags to my instagram.com link?

It does not help. UTM tags are read by the analytics on the site that receives the visit. A scan that opens instagram.com lands on Instagram's site, so the tags never reach your Google Analytics.

### How big should a printed QR code be?

There is no single minimum. DENSO WAVE, which invented the QR code, recommends printing it as large as the space allows and keeping a clear margin four modules wide on every side. Shorter links make fewer, bigger modules, so test a printed proof at the distance people will scan from.

## Sources

- [Instagram Help Center: Find and customize the QR code of your Instagram profile](https://www.facebook.com/help/instagram/925529167647849/)
- [Instagram Help Center: Scan a QR code to find someone's profile on Instagram](https://www.facebook.com/help/instagram/2030685476997658/)
- [Instagram Help Center: Edit and share your Instagram profile card](https://www.facebook.com/help/instagram/550964264146477/)
- [Instagram Help Center: Get a link (URL) to a photo or video on Instagram or Threads](https://www.facebook.com/help/instagram/372819389498306/)
- [DENSO WAVE: QR code quiet zone and symbol size](https://www.qrcode.com/en/howto/code.html)
- [DENSO WAVE: module size and printing](https://www.qrcode.com/en/howto/cell.html)
- [DENSO WAVE: error correction levels](https://www.qrcode.com/en/about/error_correction.html)
- [Google Analytics Help: collect campaign data with custom URLs](https://support.google.com/analytics/answer/10917952)
- [Google Analytics Help: default channel group](https://support.google.com/analytics/answer/9756891)
- [PostBoost docs: QR code generator API](https://postboost.co/docs/free-tools/qr-code-generator)

Canonical: https://postboost.co/learn/qr-code-for-instagram
